Titanium and Titanium Alloys_SHANGHAI GOOLEE SCIENCE AND TECHNOLOGY DEVELOPMENT CORPORATION LIMITED

Titanium tubes for Aerospace and Airplane

Listed in the following table are some of the common sizes produced for major aircraft companies. Sizes other than those shown can be produced depending on the quantity required. SEAMLESS T

Titanium Grade5 pipes for large outer diameter and thick wall oil and marine

Titanium Alloy Grade5 Ti-6Al-4V Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class,and is also the most common of all titanium alloys. The alloy is castable and is&nb

Welded Titanium Tube and Pipes

GOOLEE titaniumwelded tubes and pipes are widely used in condensers, heat exchangers, 1.Outer Diameter10mm~114mm×Wall Thickness0.5mm~2mm×Length25000mm; 2.Material: Titanium Grade1, 2, 12 Standar

Seamless titanium Tubes and Pipes

GOOLEE titanium seamlesstubes and pipes are widely used in condensers, heat exchangers, aerospace fuel pipes, bicycles, golf carts and motorcycles, etc. Products

Titanium and Steel Clad

GOOLEETitanium and Steel Clad can not only meet the requirements of mechanical properties, but also save costs and improve economic benefitsStandard Specification: ASTM B265 , ASME SB265

Commercial Pure Titanium Grade 1 Bar and Rod

Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of de

Commercial Pure Titanium Grade 2 Bar and Rod

Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. This material is very corrosion resist

Commercial Pure Titanium Grade 3 Bar and Rod

Titanium Alloy Grade 3 is “unalloyed” titanium offering improved strength, moderate ductility, and ASME Code design allowables. The material is readily weldable. This material is very corrosion resis

Commercial Pure Titanium Grade 4 Bar and Rod

Titanium Alloy Grade4 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable o

Titanium Alloy Grade5 Ti-6Al-4V Bar and Rod

Titanium Alloy Grade5 Ti-6Al-4V Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class,and is also the most common of all titanium alloys. The alloy is castable and is&nb

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) Bar and Rod

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low inters

Titanium alloy Grade 7 Ti-0.2Pd Bar and Rod

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, incl