Titanium alloy Grade 7 Ti-0.2Pd Bar and Rod

1.Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and where low pH and high temperatures above 180ºF (83ºC) to 500ºF (260ºC) are prevalent.
2.Size: Φ7mm~Φ230mm;

Products Inquiry

CompanyName * :

Email * :

Name :

Tel :

Message :

Product Details

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and where low pH and high temperatures above 180ºF (83ºC) to 500ºF (260ºC) are prevalent.

Standard Specification: ASTM B348, ASME SB348, ISO, DINAWS A5.16 (ERTi-7);

Standard	Werkstoff No.	UNS
Titanium Alloy Grade7 Ti-0.2Pd	3.7235	R52400

Technical Data Sheet

Chemical Composition
Weight %	Ti	Pd	C	Fe	N	O	H
Titanium Alloy Grade7 Ti-0.2Pd	Balance	0.12~0.25	0.08	0.3	0.03	0.25	0.015

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Titanium Alloy Grade7 Ti-0.2Pd

345

275

Titanium alloy Grade 7 Ti-0.2Pd Bar and Rod

Product Details

Related Products

Titanium and Copper Clad Bar

Titanium and Titanium Alloy Hexagon Bar

Titanium and Titanium Alloy Flat Bar

AMS Titanium Alloy 6-6-2 /6Al-6V-2Sn Bar and Rod