AMS Titanium Alloy Grade 6 (Ti-5Al-2.5Sn) Bar and Rod

1.Titanium Ti5Al2.5Sn (Grade 6) is a high strength alloy which is most commonly used in airframe and jet engine applications. Titanium Ti5Al2.5Sn (Grade 6) has good weldability, stability and strength at elevated temperatures.
2.Size: Φ7mm~Φ230mm;

Products Inquiry

CompanyName * :

Email * :

Name :

Tel :

Message :

Product Details

Titanium Ti5Al2.5Sn (Grade 6) is a high strength alloy which is most commonly used in airframe and jet engine applications. Titanium Ti5Al2.5Sn (Grade 6) has good weldability, stability and strength at elevated temperatures.

Standard Specification:

AMS 4924 Bars, Forgings, Ring (EL1 grade)

AMS 4926 Bar, Wire, Ring (Annealed - 110 ksi)

AMS 4966 Forgings

AMS 6900 Bars;

AMS-T- 9047 5Al-2.5Sn Bar;

MIL-T-9047G Bar;

Standard	Werkstoff No.	UNS
Titanium Alloy Grade 6 / Ti-5Al-2.5Sn	3.7114	R54520

Technical Data Sheet

Chemical Composition
Weight %	Ti	Al	Sn	C	Fe	N	O	H	Other
Titanium Alloy Grade 6 / Ti-5Al-2.5Sn	Balance	4.0~6.0	2.0~3.0	0.1	0.05	0.05	0.2	0.020	0.4 Total Max.

Typical Mechanical Properties (Tensile Requirements)

Material	Tensile Strength, min		Yield Strength (0.2% Offset) min or range		Elongation in 4D,min%
Material	ksi	MPa	ksi	MPa	Elongation in 4D,min%
Titanium Alloy Grade 6 / Ti-5Al-2.5Sn	120	830	115	795	10

Commercial Pure Titanium Grade 2 Bar and Rod

Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. This material is very corrosion resist

Commercial Pure Titanium Grade 1 Bar and Rod

Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of de

Medical Titanium and Titanium alloy Bar and Rod

1. TitaniumRodfor Neurosurgery Implants KirschnerRod Specification (mm) Φ7mm~Φ230mm Length (mm) 1000~3000

Titanium Alloy Grade 36 Ti45-Nb Bar and Rod