Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitials (ELI). The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required. This alloy is commonly used in medical implants where strength is important.
Standard Specification:ASTM B265, ASME SB265, ASTM F136, ISO, AMS 4911;
Standard |
Werkstoff No. |
UNS |
Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) |
3.7165 |
R56407 |
Technical Data Sheet
Chemical Composition |
|||||||||
Weight % |
Ti |
Al |
V |
C |
Fe |
N |
O |
H |
|
Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) |
Balance |
5.5~6.5 |
3.5~4.5 |
0.08 |
0.25 |
0.03 |
0.13 |
0.0125 |
Typical Mechanical Properties (Tensile Requirements)
Material |
Tensile Strength, min |
Yield Strength (0.2% Offset) min or range |
Elongation in 4D,min% |
Reduction of Area Min % |
||
ksi |
MPa |
ksi |
MPa |
|||
Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) |
120 |
828 |
110 |
759 |
7.5H,6.0I |
25 |
H: For Product section or wall thickness values<1.0 in.;
I: For product section or wall thickness values≥1.0 in.;
Titanium Alloy Grade 3 is “unalloyed” titanium offering improved strength,moderate ductility, and ASME Code design allowable. The material is readily weldable. This material is very corrosion re
Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. This material is very corrosion r
Standard Werkstoff No. UNS Commercial Pure Titanium Grade1 3.7025 R50250 &n
Titanium alloys are divided into alpha alloys, near-alpha alloys, alpha and beta alloys, and beta alloys. Grade Ti 15V 3Cr 3Al 3Sn alloy is a beta alloy that can be strip-rolled and heat-treated. It