Ti-6Al-4V ELI Alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitials (ELI). The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required. This alloy is commonly used in medical implants where strength is important.
Standard Specification: ASTM B861, ASTM B338, AMS 4928, ASTM F136, ISO, DIN AWS A5.16 (ERTi-23)
Standard |
Werkstoff No. |
UNS |
Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) |
3.7165 |
R56407 |
Technical Data Sheet
Chemical Composition |
|||||||||
Weight % |
Ti |
Al |
V |
C |
Fe |
N |
O |
H |
|
Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) |
Balance |
5.5~6.5 |
3.5~4.5 |
0.08 |
0.25 |
0.03 |
0.13 |
0.0125 |
Typical Mechanical Properties (Tensile Requirements)
Material |
Tensile Strength, min |
Yield Strength (0.2% Offset) min or range |
Elongation in 4D,min% |
Reduction of Area Min % |
||
ksi |
MPa |
ksi |
MPa |
|||
Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) |
120 |
828 |
110 |
759 |
7.5H,6.0I |
25 |
H: For Product section or wall thickness values<1.0 in.;
I: For product section or wall thickness values≥1.0 in.;
GOOLEE titanium capillary tubesWidely used in medical, experimental, aerospace, pharmaceutical, chemical and other occasions; Products Dimensions Mm Titanium G
GOOLEE can provideTitanium tube in Coils can be used all kinds of heat-exchangers; Standard Werkstoff No. UNS Commer
GOOLEE can provide thin wall thickness titanium tubes and pipes can be used all kinds of exhaust for bicycle and motorcycle ,automotive etc. Standard Werkstoff No. UNS
GOOLEE can provide inner thread and outer thread tubes and pipes: Standard Werkstoff No. UNS Commercial Pure Titanium Grade1 3.7025 R50250 Commercial Pure Tita